|
|
|
 |
|
 |
|
|
|
|
 At
DIVING FOR FUN, we can service and repair MARES pneumatic
spear guns. Our service technicians are MARES Master Lab Technicians and have been factory certified by MARES to repair all models of MARES pneumatic
spear guns including the Sten and Cyrano models.
At DIVING FOR FUN,
we also service and repair most brands of band guns, but we specialize in JBL and Sea Hornet band guns. Our scuba equipment technicians are
also certified scuba diving instructors with years of field experience and avid spear fisherman.
Most repairs are performed on site. Next time let DIVING FOR FUN
service your pneumatic or band spear gun.
|
PNEUMATIC SPEAR GUN REPAIR PROCESS
|
 Prior
Prior to disassembly the spear gun is wiped down and visually inspected for any signs of leakage.- The spear gun is then immersed in a leak test bath to look for signs of leakage from o-rings and seals.
- The pressure is released and the spear gun is disassembled.
- All metal parts are placed in the ultra sonic cleaner, and a chrome-safe acidic
solution is used to dissolve all corrosion and undesirable sea-life growth.
- All plastic/rubber and silicone parts are washed and then treated with a silicone spray.
- Metal parts are removed, washed in a neutralizing solution, dried, and then polished.
- All old parts are visually inspected to determine if any parts show excessive wear to suggest
a revised service interval to the customer.
- The new parts are checked for compatibility and completeness.
- The spear gun is then assembled and oil added to the manufacturers specification.
- The spear shaft is visually inspected for straightness and deformities.
- The spear gun is then pressurized according the manufacturers specification and immersed in a leak test bath
to look for signs of leakage from o-rings and seals.
- The power regulator is then tested. The spear gun is test fired on both the low and high settings using a floor
base test shaft.
- The trigger stroke and sensitivity is then measured and adjusted according to manufacturers specification.
- Inspect and verify the safety switch functions according to the manufacturers specification.
NORMAL TURNAROUND TIME FOR SERVICE IS TWO (2) WEEKS
|
BAND SPEAR GUN REPAIR PROCESS
|
 Prior
Prior to disassembly the spear gun is wiped down and visually inspected for any signs of excessive or wear or damage.- The spear gun is disassembled.
- All metal parts are placed in the ultra sonic cleaner, and a chrome-safe acidic
solution is used to dissolve all corrosion and undesirable sea-life growth.
- All plastic/rubber and silicone parts are washed and then treated with a silicone spray.
- Metal parts are removed, washed in a neutralizing solution, dried, and then polished.
- All old parts are visually inspected to determine if any parts show excessive wear to suggest
a revised service interval to the customer.
 The
new parts are checked for compatibility and completeness.- The spear gun is then assembled with new bands according the manufacturers specification.
- The spear shaft is visually inspected for straightness and deformities.
- The trigger stroke and sensitivity is then measured and adjusted according to manufacturers specification.
- Inspect and verify the safety switch functions according to the manufacturers specification.
NORMAL TURNAROUND TIME FOR SERVICE IS TWO (2) WEEKS
|
SERVICE DESCRIPTION
|
PRICING
|
|
The Spear Gun is completely disassembled, cleaned and lubricated.
Reassemble and adjust to manufacturer's
specifications. The service price does NOT include the cost for non-warranty repair parts or bands.
|
|
MARES Pneumatic Spear Gun Service
|
$55.00
|
|
The Spear Gun is completely disassembled, cleaned and lubricated.
Reassemble and replace all o-rings, add oil lubrication, pressurize the chamber, and adjust to manufacturer's
specifications. The service price does NOT include the cost for non-warranty repair parts.
|
|
For any Spear Gun service that is needed in a turnaround time of less than two weeks.
|
ALL SERVICE
● A Repair/Maintenance Report will be completed describing the service performed.
● A copy of the maintenance report will be provided to the customer upon completion
of the service.
● A copy of the maintenance report will be maintained on site at
DIVING FOR FUN.
WARRANTY SERVICE
● Warranty cards MUST BE PRESENTED at time of
service and performed at the
manufacturers' scheduled time frame to be kept active.
● All warranted parts will be replaced and returned to the manufacturer at no cost to
the customer.
● A copy of the maintenance report will be sent to the manufacturer as required.
|
 |
For more information, please call us at
(407) 658-4797 or
email us at
or
click here
to request
additional information or
sign-up online
for a class or dive trip.
|
|
|
|
|
|
|
 |
|
 |
|
|
